• 10% Rabatt für Mitglieder
  • Eigene Mitgliederzeitschrift
  • Hauseigenes Testlabor
Menu

Dieser Browser wird nicht mehr unterstützt.

Damit alle Webinhalte korrekt dargestellt werden, verwenden Sie bitte die aktuelle Version von Google Chrome, Microsoft Edge, Mozilla Firefox, Opera oder Apple Safari.

Adafruit 2.5 W Class D Mono Amplifier (PAM8302)

Adafruit 2.5 W Class D Mono Amplifier (PAM8302)

Overview

This small but efficient mono amplifier is able to deliver up to 2.5W 4-8 Ω impedance speakers. It features the PAM8302A Class-D mono audio amplifier and has a built-in thermal and over-current protection to keep everything safe.

Overview

This small but efficient mono amplifier is able to deliver up to 2.5W 4-8 Ω impedance speakers. It features the PAM8302A Class-D mono audio amplifier and has a built-in thermal and over-current protection to keep everything safe.

5,36 €
Nichtmitglieder: Regular Price 5,95 €
auf Lager
Lieferzeit: 2 Werktage

Details

This small mono amplifier is surprisingly powerful - able to deliver up to 2.5 W into 4-8 Ω impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0 V - 5.5 V DC. Since the amplifier is a class D, it's very efficient making it perfect for portable and battery-powered projects. It has built-in thermal and over-current protection. There's even a volume trim pot so you can adjust the volume on the board down from the default 24 dB gain.

The A+ and A- inputs of the amplifier go through 1.0 µF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the Audio-pin to ground. The output is "Bridge Tied" - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency 250 KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly.

The amplifier comes with a fully assembled and tested breakout board, a header to plug it into a breadboard and a 3.5 mm screw-terminal blocks so you can easily attach/detach your speaker. Speaker is not included, we recommend using any 4 Ω or greater impedance speaker.

Features

  • Output Power: 2.5 W at 4Ω, 10% THD (total harmonic distortion), 1.5 W at 8 Ω, 10% THD, with 5.5 V Supply
  • 50 dB PSRR (power supply rejection ratio) at 1 KHz
  • Filterless design, with ferrite bead + capacitors on output.
  • Fixed 24 dB gain, an onboard trim potentiometer for adjusting input volume.
  • Thermal and short-circuit/over-current protection
  • Low current draw: 4 mA quiescent and 0.5 mA in shutdown (due to pull-up resistor on SD pin)

EagleCAD PCB files on GitHub

Spezifikationen

More Information
Artikel-Nr. 18745
Hersteller Adafruit Industries

Downloads

PAM8302A 529.71 kB

Bewertungen (0)

Es gibt noch keine Bewertungen. Schreiben Sie die erste Bewertung zu diesem Produkt.

Ihre Bewertung für Adafruit 2.5 W Class D Mono Amplifier (PAM8302)

Ihre Bewertung für Adafruit 2.5 W Class D Mono Amplifier (PAM8302)

Ihre Bewertung